Learn All About 3D Printing | 3D Printing Spot

3D Printing? How about 4D Printing or 5D Printing

4D printing and 5D printing carry a lot of intrigue around them but are relatively lesser known than 3D printing.

What 3D Printing Software do People Use? Best Choices in 2021

Through our article, we bring you the type of 3D printing software people use with some of the best choices to try out in 2021 for perfect results.

What Materials are Available for 3D Printing? A Guide

Here we explore all the popular materials available for 3D printing.

PETG Filament | All FAQs Answered

Is PETG stronger than PLA? Is PETG softer than PLA? Is PETG filament Food Safe? What are its applications?

3D Printed Clothes: Fashion, Fabric, and Material

Engineers are rapidly researching and developing new, sustainable, and compatible 3D printing fabrics to enable affordable 3D printed clothes.

What is PETG Filament? A simple answer

PETG filament overcomes most of the problems associated with PLA and ABS while enhancing the look, feel, and strength of a part.

3D Printing Chocolate: What you need to know

3D printing has come a long way - even in food and 3D printing chocolate.

3D Printing Materials: How much do they cost?

3D printing materials cater to all sectors from aerospace to footwear, but how much do the variety of 3D printing materials cost?

Free 3D Printing: Files, Software, and Printers

Users can find a wealth of free 3D printing resources online but they just need to look in the right direction.

Who Invented 3D Printing? A Brief History

An American engineer managed to invent a rapid prototyping technology now known as 3D Printing.

Why Don't People Like PETG?

The problem for PETG starts with its printability.

Make Money with 3D Printing: Here is How

There are several methods for making money with 3D printing that do not require the know-how to manufacture the hardware or code the software.

3D Printed Food: What You Need to Know

3D printed food could help reduce food waste, improve dietary health, and increase food accessibility.

Printing with PETG: The Good and The Bad

PETG is a thermoplastic polymer that is often the preferred filament choice among 3D printing experts.

Cura vs Slic3r: Pros & Cons of Both

Cura and Slic3r rank among the most popular and most effective slicer tools available to the public. Both slicers are open source.

Comgrow vs Creality: Pros & Cons of Both

Comgrow is a company that sells Creality products. Creality makes a wide range of 3D printers and 3D printing accessories.

What Is 3D Slicer Software?

3D Slicer Software creates 2D slices of a 3D object that show a 3D printer how to print the object. 3D Slicer Software is essential to 3D printing.

3D Printed Prosthetics - Most Common Choices

The most common material for a 3D printed prosthetic upper limb is ABS for its low cost and lightweight material.

How to Edit G-code in Cura: Everything You Need to Know

This guide will provide a step-by-step understanding of the tools and processes that are available to you for editing G-code in Cura.

Why 3D Printing Fails?- 5 Examples

3D printing fails for several reasons, including warping, broken build plates, and use of the wrong material.

What Are the Biggest 3D Printed Things?

Many large structures and objects have 3D printing involved.

What are the Smallest 3D Printed Things?

The smallest 3D printed things are artistic sculptures, geometric shapes, and tiny figurines.

Can You Print 3D Shoes?

Many footwear companies have begun 3D printing prototypes or customized designs.

What Is CAD? - A Simple Answer

CAD is computer software that assists with the process of designing, known as computer aided design.

Can 3D Printers Print Metal?

3D metal printing allows for higher complexity and design freedom to create the exact part.

Skynet vs Marlin: Which of These Two Firmwares Is Best?

Marlin is by far the more superior option for newer machines and updated firmware options.

Smoothieware vs Marlin: Which Firmware Is Better?

Marlin is the better firmware choice for 3D printing because its large, experienced community of developers ensures 3 things.

How To Calibrate an M3D Printer: A Quick Guide

Calibrating your M3D printer requires you to check and manually adjust three significant areas.

Inland Vs. Hatchbox: Pros and Cons of Each Filament

Inland and Hatchbox PLA filaments have various pros and cons to consider.

Esun Vs Hatchbox: Which Filament Is Better?

When comparing eSun and Hatchbox PLA filaments, you should consider the following factors.

Ultimaker vs. Lulzbot: Pros & Cons of Each

Ultimaker and Lulzbot are two of the leading manufacturers of 3D printers.

3D Printing Layer Shifting: Here's How to Deal With It

Layer shifting is corrected by a thorough check and maintenance of the machine, particularly the belts, pulleys, print head, and motors.

PrusaSlicer vs. Cura: Which Choice is Better?

PrusaSlicer and Cura are both excellent choices for anyone looking to get the most out of their 3D printer.

What Is the Ideal Print Speed for The Anet A8

The ideal print speed of the Anet A8 is between 30 and 60 mm/s.

CraftWare vs CURA: Which of These Two Softwares Is Best?

Most users agree that CURA is the best option, followed by CraftWare. See why.

Skeinforge vs. Slic3r: Which One Should You Choose?

Choosing between Skeinforge and Slic3r is mostly a matter of personal preference, with both programs strong choices for 3D manufacturing.

Melzi vs Ramps: Which Board is Better?

Ramps boards are more established. Melzi boards are made for mass production.

Is PLA Microwave Safe? Here’s the Truth!

Utensils, microwave components, and containers made from polylactic acid, or PLA, are not microwave safe.

Repetier Host Vs. Cura: Pros & Cons Of Both

Cura is the most popular 3D printing slicer in the world. Repetier Host targets a more professional 3D printing audience.

MatterControl Vs Cura: Differences & Similarities Revealed

While MatterControl and Cura have many similarities, the programs themselves are different.

Cr-10 Vs. Cr-10s: What is the Difference Between These Models?

The Cr-10s features a Z-axis screw, upgraded motherboard, resume printing function, and filament breakage sensor.

PETG vs Acrylic: Which Material Should You Use?

In most cases, you should use PETG over acrylic. PETG is more affordable and 5-7 times stronger than acrylic.

What's the Strongest Infill Pattern? Here is What I Think

Infill patterns can vary depending on what type of job you are doing as well as what kind of materials you are working with.

PETG Vs Nylon: Which Filament Is Better?

PETG and Nylon are great filaments for different uses.

How to Make Your 3D Magnetic Printing Projects: A Complete Guide

Make your 3D prints magnetic by having a high amount of density while simultaneously controlling the magnet’s microstructures.

IdeaMaker vs. Cura: Pros & Cons of Each

Cura includes open-source software while IdeaMaker does not. See what else.

Anycubic Kossel Vs. Prusa I3: Main Differences Revealed

Anycubic Kossel is well-liked for its inexpensive price-point, Prusa i3 is renowned for its recognition from various 3D printer experts and reviewers.

Tevo Tornado Vs. Creality Cr-10: Which Is Better?

The Tevo Tornado and Creality CR-10 are essentially the same machine. Read what comes out of the box.

Marlin vs. Repetier: Which Firmware Should You Choose?

Both Marlin and Repetier have extensive printing features that can be useful in 3D printing.

The Best Anycubic I3 Mega Cura Settings You Must Try Out!

Anycubic I3 Mega Cura printer is one of the most popular printers, understanding its many adjustable settings will aid you in getting the best results.

123D Design vs Sketchup: Which Is Better For You?

123D Design is available to download from third parties, but no longer updated. SketchUp, is more user friendly with a push/pull feature that makes it unique.

The Best Stepper Motor Driver to Use for Your 3D Printer!

The best stepper motor driver depends on the motor you have, the voltage capacity, the motor’s phase, current output rating, and adjustability.

PVA vs HIPS: Which Material Should You Be Using?

PVA is the appropriate support structure for prints with PLA when printing complex geometric prints. Otherwise, HIPS would be a wise choice prints made of ABS.

Simplify3d vs. Cura: Pros & Cons of Both

Satisfactory products, Simplify3d and Cura differ greatly concerning their cost, user interface, functionality, compatibility, features, and additional updates.

How Long Does It Take To 3D Print A Phone Case? This Long!

Printing a 3D phone case only takes a few hours if you use a simple design.

Polypropylene vs. ABS: Pros and Cons of Each

In general, polypropylene has a lower density than ABS, but it also has a lower melting point.

BuildTak Review: The Best Printing Surface?

BuildTak 3D printing surfaces represent themselves as solving some of the most common printing problems, foremost among these being problems with adhesion.

Additive Manufacturing vs. 3D Printing: Same or Different?

Additive manufacturing and 3D printing are different terms used to describe the same process of creating a dimensional object from a computer-animated design.

3D Printing Vs. Injection Molding: Pros & Cons of Each

Injection molding focuses on producing in large volumes, whereas 3D printing focuses on experimental production.

How Long Is A 1kg Spool of Filament? This Long!

A 1 kg spool of 1.75 mm filament is between 100-140 meters long. A 1 kg spool of 3.00 mm filament is 320-410 meters long.

Is Glow in the Dark PLA Abrasive? Here’s the Truth!

Glow in the dark PLA is more abrasive to a printer than standard PLA. This product commonly contains strontium aluminate...

Can You Patent a 3D Printed Product? Here’s the Answer!

3D objects can be patented. The process to patent a 3D object is identical to the patenting process of any other object or idea.

How to Improve Your 3D Printer's Performance: A Quick Guide

3D printers can be improved by incorporating additional tools, optimizing settings, or simply troubleshooting the printer itself.

How Much Can You Print with 1Kg of Filament?

3D printing with filament is a direct transfer system, so expect to print almost 1 Kg to one 1 Kg spool of filament with only minor loss.

Can You Dissolve Polylactic Acid (PLA)? Is it Possible?

PLA is soluble. Polylactic acid can be dissolved using various agents such as methyl ethyl ketone, acetone, ethyl acetate, tetrahydrofuran, and caustic soda.

Is Simplify3D Worth It? My Opinion

For those who are professionals or who need constant access to a quality 3D printing software (or “slicer), Simplify3D is worth the price.

How Accurate Are 3D Printers?

Many variables decide the accuracy of a 3D printer. From the design process to the type of material used. Sometimes inaccuracies can occur.

Is 3D Printing Dead? My Opinion

3D printing is far from dead. On the contrary, it is still growing and evolving in both the private and public sectors and even garners massive federal support.

PETG vs. PLA: Main Pros & Cons of Both

PETG and PLA are common filaments for 3D printing. PLA is sustainable and beginner-friendly, PETG is more stable and impact-resistant.

Mk8 Vs. Mk10: Which Nozzle Should You Be Using?

For smaller designs an MK8 will work perfectly and the MK10 will work for bigger objects.

Buildtak vs. PEI: Which Surface Should You Choose?

PEI is a better option than Buildtak for consistently getting high-quality prints with minimal required time and effort.

PLA vs. PLA+: What are the Main Differences Between Them?

PLA and PLA+ have a lot of similarities, but their differences set the two apart.

1.75mm vs. 3mm Filament: Pros & Cons of Both

1.75 mm filament is popular offering a wide range of extruder nozzle dimension usability. 3 mm is preferred for its durability.

Rapid Prototyping vs 3D Printing: Main Differences Revealed

Rapid prototyping describes the process of producing a 3D object from a computer model using any method. 3D printing is one of those methods, but...

Ender 3 vs. Ender 3 Pro: Main Differences Between Each

The Ender 3 and the Ender 3 Pro are remarkably similar 3D printers, with both models having the same general look, build volume, motherboard.

Is UV Resin Toxic? Here's The Truth!

UV resin used in 3D printing is very toxic, not only for people but also for the surrounding environment. Body parts exposed to the resin can be harmful.

PolyJet Vs FDM: The Main Differences Revealed

One significant difference between the two types is PolyJet produces a finer level of detail where as FDM produces stronger parts.

Is SLA or SLS More Accurate? The Truth Revealed

SLA is a more accurate 3D printing technique than SLS. The resin-based approach of SLA printing leaves the end product with crisp edges and a smooth finish.

A6 Vs. A8 3D Printer: Which One Should You Choose?

Anet3D offers both the A6 and the A8 printer both very well known. If you need a large support community go with A8 if you want to go it alone chose the A6.

How to Tighten 3D Printer Belt: A Step-To-Step Guide

All 3D printers have little quirks that make them unique. Below is a quick reference to the steps you need to follow to tighten your belt.

How to Smooth PLA 3D Prints: A Complete Guide

There are a variety of ways to smooth a PLA 3D print, though most involve removing or adding material. Sanding is the most common method

How Much Filament Should You Buy for Your 3D Printer?

Buy at least two rolls of filament to get started. Then a good rule of thumb is to estimate the weight of the items you intend to print and buy that amount.

The 10 Reasons Why Your 3D Printer is Dislocating

Dislocations are a frustrating issue that can occur during the 3D printing process. Here are 10 reasons why you 3D printer may be dislocating.

Can You Make Money 3D Printing? A Few Tips on How to Do So

With patience and hard work, a little experience in e-commerce, and a trusty 3D printer, you can easily turn your favorite hobby into a money-making venture.

Why Does My 3D Printer Stop Mid Print? A Few Reasons Why

A 3D Printer could stop in the middle of a print for various different reasons. Read to find out what.

3D Printer Belt Tension: Everything That You Need to Know

Tension on a 3D printer belt is essential for getting high-quality prints. Loose tension throws off the accuracy of the print head.

Are PETG Fumes Toxic? What You Need To Know

PETG is the safest 3D printing filament available today. The fumes produced from pure and uncontaminated PETG are harmless.

Elegoo Mars Vs ANYCUBIC Photon: Which Printer Is Better?

Elegoo Mars is the best in terms of affordability paired with quality. However, Anycubic Photon easily out competes Elegoo Mars in its precision and detail.

Makergear M2 Vs Replicator 2: Pros & Cons of Each Model

The top pros of the Makergear M2 and the Replicator 2 are exact opposites. If it’s a “pro” for one, it’s a “con” for the other.

Is PETG Food Safe? What You Must Know About This Material

PETG is food safe. Each manufacturer has to get separate FDA approval, and some brands are even approved by the FDA as a food safe filament.

Purging in 3D Printers: What You Need to Know

To prevent 3D printers from building all of the gunk and residue on the printing machinery, they must be cleaned.

Can I Sell Things from Thingiverse?

You can sell some things from Thingiverse if they have the correct license for it.

Can I Bring a 3D Printer on a Plane?

Yes you can bring a 3D printer on a plane. However, it is best to check with the safety and regulations of your particular airline prior to arriving.

What is the Most Reliable 3D Printer? What You Need to Know

The most reliable 3D printer is the QIDI Tech X-Plus 3D Printer. The reason is...

Are 3D Pens Worth It? My Personal Opinion

3D pen users tend to care less about what they are making and more about the artistic joy it brings to them.

FreeCAD Vs. OpenSCAD: Pros & Cons of Each Software

CAD software typically requires a large upfront cost. Luckily, there are free alternatives like FreeCAD and OpenSCAD, each with it own pros and cons.

How Much Does a 3D Printer Weigh? What You Must Know

The weight of a 3D printing machine depends on its size. A 3D printing machine with a printing area of 150 x 150 x 150 mm weighs around 60.6 lbs (27.5 kg).

The Toybox 3D Printer: Is it Really Easy to Use?

The Toybox 3D printer is so easy to use that you can begin printing in as little as 10 minutes after opening the box.

Can HDPE be used for 3D Printing?

Yes, HDPE (High-Density Polyethylene) can be used as a 3D printing filament? Although the filament may be hard to come by, try making it at home.

RECENT POSTS