ALL POSTS

Does PETG Give Off Fumes?

The popularity of 3D printing with PETG cannot be ignored, but safety precautions must be taken. You should know it works and whether it gives off fumes too.

Overture PETG Settings

When it comes to 3D printing, every filament type is different and the same is true for overture PETG and the proper settings that are needed to be successful.

Best 3D Printing Websites

When you have proper 3D printing access, you have a wide range of things you can accomplish and with the best 3d printing websites it becomes even easier.

Is PETG Sandable?

For 3D printing, PETG is one of the most commonly used and durable materials. But it requires smoothing causing people to ask if PETG is sandable or not.

Is Petg Dishwasher Safe?

If you have any 3D printing experience, you know the importance of cleaning PETG. This is why it is so critical to know if PETG is dishwasher safe or not.

Best 3D Printing Filament Brands

Whether you are an experienced 3D print professional or simply a hobbyist, you are going to want to utilize the best filament, but which brands are the best.

Best 3D Modeling Software For 3D Printing

If you want to take your 3D printing to a whole new level, you are going to want to make use of quality 3D modeling software, but which is the best?

What Material Is Used For 3D Printing?

If you know what material is used for 3D printing, you'll have a better idea of how to get the most out of your prints.

Best CAD Program For 3D Printing

The world of 3D printing is constantly advancing and one of the key reasons behind this is due to the possibilities that CAD programs offer users.

How To Dry PETG Filament

Moisture can ruin just about any print and 3D printer extruder. To combat this, you need to know how to dry PETG filament.

Best Hairspray For 3D Printing

If you want the best possible results with your prints, then you are going to need to buy the right kind of hairspray, but which is best for 3D printing?

How To Print PETG On Glass

PETG is an impact and temperature-resistant plastic that has widespread applications in 3D printing. This article will explain how to print PETG on glass.

What Is PETG Used For?

What is PETG used for, and what can be made with it? This has been a popular question lately, especially with the rise of 3D printing.

Most Reliable 3D Printers

Nowadays, 3D printers are available in various styles and sizes, used for different applications. But which are the most reliable 3D printers? Let’s find out.

Best PETG Filament

If you want to take your 3D print designs to a new level, then getting the right PETG filament for your printer may be the ultimate way to enhance your craft.

Most Popular 3D Printers For Home

Looking for the most popular 3D printers for home that are affordable, easy to store, and satisfy multiple needs? Check out our list below.

Best 3D Printing Nozzles

If you want to take your 3D printing to the next level, you need to ensure that all components of your print are in order - with your nozzle being vital.

Best Laptops For 3D Printing

You don’t need to have a fancy PC setup to get started with 3D printing, you can even use a laptop! These are the best laptops for 3D printing.

Best Glue For 3D Printing

Having the right glue is essential for 3D printing when it comes to both bed adhesion and parts bonding. This is the best glue for 3D printing.

Best 3D Printing Pens

Every part and every piece can make a difference while you’re 3D printing, especially the pens. These are the best 3D printing pens on the market.

How Much Electricity does a 3D Printer Use?

3D printers are used in almost every industry imaginable, from automotive to electronics. But how much electricity does a 3D printer use? Let's find out.

Sunlu PETG Settings

Sunlu is a brand name synonymous with 3D printer filaments and 3D printers. Despite this, many folks still don't get the Sunlu PETG settings right.

Printing PETG On Ender 3

PETG has changed the game when it comes to 3D printing. However, many people are still unaware of how the PETG 3D filament works, especially on Ender 3.

What Is a Raft in 3D Printing?

To ensure better bed adhesion, many people use a raft when they print out 3D objects. However, the question here is, what is a raft in 3D printing?

What Is The Hot End in a 3D Printer?

We often see guides to 3D printers, but seldom do we find information on some of the smaller components of these 3D printers - such as 3D printer hot ends.

How Much Does 3D Printer Filament Cost?

3D printer filament is to a 3D printer what ink is to a normal printer. We all know that printer ink is expensive, but how much does 3D printer filament cost?

What Is Infill in 3D Printing?

3D printing has several terms that newbies often struggle to wrap their heads around. We’re aware of terms like “hot end,” but what is infill in 3D printing?

How To Choose Stepper Motor for 3D Printing

Stepper motors are essential components of 3D printers. Wondering how to choose a stepper motor for 3D printing? Well, you’ve come to the right place!

What Is Brim in 3D Printing?

Users of 3D printers don't realize that many moving parts have to work together to get the best results. With that said, what is the brim in 3D printing?

What is Layer Height in 3D Printing?

What is layer height in 3D printing? It's a factor that's usually not considered, especially by beginners, which can be a terrible mistake.

How Big can a 3D Printer Print?

We're all aware of what a 3D printer can do by now – print 3D models (it's in the name, after all). But how big can a 3D printer print?

What Is The Extruder In a 3D Printer?

What is the extruder in a 3D printer? Well, to put it simply, it’s a crucial part of the whole 3D printing system, which is why you need to know all about it.

What Does PLA Stand For?

PLA is a commonly used term in the 3D printing sphere. It's a bioplastic that can be used to develop 3D printed items. But what does PLA stand for?

How To Clean a 3D Printer Nozzle

Clogged or dirty 3D printing nozzles can ruin your printed models. To make sure your machine performs well, you should know how to clean a 3D printer nozzle.

How Much Does a 3D Printer Cost?

3D printers are becoming increasingly common these days, but how much does a 3D printer cost? Depending on what model you're getting, the price may vary.

How Much Filament Is Used In 3D Printing?

A 3D printer needs 3D printing filament to convert a 2D scan into a 3D object. So, what exactly is this filament and how much filament is used in 3D printing?

3D Printing Jobs: The Impact on Manufacturing Jobs

Experts are concerned that the rise of 3D printing will have a significant impact on manufacturing jobs.

Top 12 Free Slicer Software

A slicer software links the 3D CAD model and the actual 3D printing process. It is one of the most fundamental operations in 3D printing an object.

What is the Strongest 3D Printer Material?

As 3D printing becomes more prevalent in everyday product manufacturing, the demand for stronger 3D printer materials rises.

Best Things To 3D Print At Home

3D printing enables you to design, create, and produce almost anything you can imagine. To get you started, here are some of the best things to 3D print at home.

Best Things To 3D Print & Sell

3D printing makes it possible to design and create just about anything you want from the comfort of your own home. What are the best things to print and sell?

Best 3D Printing Downloads

3D printing is growing by the day, with more and more files being offered for free to download. What are the best sites for finding STL files for 3D printing?

Learning 3D Printing: Courses, Classes and Tutorials

As 3D printing technology adoption increases, it will become imperative to learn 3D printing at all levels of education.

Best OctoPrint Plugins

Desktop 3D printing still relies heavily on trial and error, and it is not always possible to control or monitor all of the minute parameters to avoid failure.

3D Printer: Why Bed Leveling is Needed

When we talk about FDM 3D printing, much emphasis is given to the materials and their behavior.

Best 3D Printers For Miniatures

Having the ability to 3D print your own products from the comfort of your home is exciting. But what are the best 3D printers for tabletop miniatures?

Where & How To Learn 3D Printing

3D printing is taking the manufacturing industry by storm, but it’s not the easiest thing in the world to do. Here’s where and how you can learn 3D printing.

Best 3D Printing Filament Colors

So you’re just getting into 3D printing but want to make sure you have everything you need to get started. What are the best 3D printing filament colors?

Where To Use A 3D Printer For Free

The world of 3D printing is one of the most exciting areas of manufacturing out there, but it isn’t cheap. Is there anywhere to use a 3D printer for free?

A Guide to Selecting the Best 3D Modeling Software

With the rapid advancement of 3D printing technology, the demand for powerful 3D modeling software has also skyrocketed.

How 3D Printed Houses Are Made

3D printing is becoming more and more prevalent across various industries. These days, you can even have a 3D printed home. How are 3D printed houses made?

Best 3D Printing Apps

There is an app for just about everything these days. Even 3D printing. Take a look at the best 3D printing apps to take your printing to the next level.

Will 3D Printing Replace Sculpting?

Technology has always played an important role in the evolution of contemporary art forms, dating back to the dawn of time.

Best 3D Printing Adhesive

3D print bed adhesion is used to ensure the material adheres to the bed and stays in place. So what are the best 3D printing adhesives on the market?

How 3D Printing Metal Works

3D printing is becoming more and more advanced as time goes on. Modern systems can even 3D print metal, but how does it work?

How 3D Printing Is Changing The World

3D printing is changing the ways in which manufacturing happens, sure. But this exciting new technology has the ability to change the world.

Fun with 3D Printing: A Few Ideas

3D printing is about more than just producing professional parts to cut costs and improve performance to create better products for consumers.

3D Printing in 2021 - What Is New?

3D printing technology and the industry are constantly evolving, and we see new developments every year.

The Best 3D Printing Forums

3D printing communities and forums are gaining wide popularity owing to the vibrancy of the technology itself.

Best 3D Printing Software

What sets a 3D printing software apart? The best (TinkerCAD, Rhinoceros 3D, FreeCAD, etc.) are characterized by some of the features we shall cover below.

Best 3D Printers Under $500

Are you thinking about getting started with 3D printing? We present you with a batch of excellent printers under $500 currently available in the market today.

Best 3D Printers For Beginners

3D printers are experiencing a steady increase in demand from enthusiasts of 3D printing who have discovered the art and want to practice at their comfort.

How Can 3D Printing Benefit You?

Everyone, whether an individual or an organization, is poised to come across 3d printing and eventually benefit from it.

What Is 3D Printing?

3D printing saves on cost as it makes creating a single item as cheap as creating hundreds of them. Today, we use 3D printing in creating models in industries.

How 3D Printing Works

3D printing works through computer-controlled programs. It involves extrusion and movement of molten plastic from tiny nozzles that are precisely controlled.

3D Printing Advantages & Disadvantages

You’ve probably heard about 3D printing. Every technology has its pros and cons, and 3D printing is no different. What are these advantages and disadvantages?

3D Printing: How it is Changing Healthcare in 2022

Healthcare should always get cheaper but also better and this is exactly what 3D printing delivers.

Will 3D Printing Replace Traditional Manufacturing?

With the rapid global adoption of 3D printing technology, concerns crop up about the viability of traditional manufacturing.

How to get started with 3D Printing? A Beginners View

It is important to get a beginner’s view into 3D printing and understand the basics to know how to get started with 3D printing.

3D Printing in the Classroom: How to Implement

3D printing technology is known to spark interest in STEM learning by encouraging creative thinking, problem-solving, and engagement with teachers.

3D Printers in 2021: Choose from the Best

The article will highlight the features and showcase the specifications of 11 of the best 3D printers in 2021.

3D Printing: How to Choose the Right Service

Choosing the right 3D printing service is a challenge especially for new users.

3D Printing? How about 4D Printing or 5D Printing

4D printing and 5D printing carry a lot of intrigue around them but are relatively lesser known than 3D printing.

What 3D Printing Software do People Use? Best Choices in 2021

Through our article, we bring you the type of 3D printing software people use with some of the best choices to try out in 2021 for perfect results.

What Materials are Available for 3D Printing? A Guide

Here we explore all the popular materials available for 3D printing.

PETG Filament | All FAQs Answered

Is PETG stronger than PLA? Is PETG softer than PLA? Is PETG filament Food Safe? What are its applications?

3D Printed Clothes: Fashion, Fabric, and Material

Engineers are rapidly researching and developing new, sustainable, and compatible 3D printing fabrics to enable affordable 3D printed clothes.

What is PETG Filament? A simple answer

PETG filament overcomes most of the problems associated with PLA and ABS while enhancing the look, feel, and strength of a part.

3D Printing Chocolate: What you need to know

3D printing has come a long way - even in food and 3D printing chocolate.

3D Printing Materials: How much do they cost?

3D printing materials cater to all sectors from aerospace to footwear, but how much do the variety of 3D printing materials cost?

Free 3D Printing: Files, Software, and Printers

Users can find a wealth of free 3D printing resources online but they just need to look in the right direction.

Who Invented 3D Printing? A Brief History

An American engineer managed to invent a rapid prototyping technology now known as 3D Printing.

Why Don't People Like PETG?

The problem for PETG starts with its printability.

Make Money with 3D Printing: Here is How

There are several methods for making money with 3D printing that do not require the know-how to manufacture the hardware or code the software.

3D Printed Food: What You Need to Know

3D printed food could help reduce food waste, improve dietary health, and increase food accessibility.

Printing with PETG: The Good and The Bad

PETG is a thermoplastic polymer that is often the preferred filament choice among 3D printing experts.

Cura vs Slic3r: Pros & Cons of Both

Cura and Slic3r rank among the most popular and most effective slicer tools available to the public. Both slicers are open source.

Comgrow vs Creality: Pros & Cons of Both

Comgrow is a company that sells Creality products. Creality makes a wide range of 3D printers and 3D printing accessories.

What Is 3D Slicer Software?

3D Slicer Software creates 2D slices of a 3D object that show a 3D printer how to print the object. 3D Slicer Software is essential to 3D printing.

3D Printed Prosthetics - Most Common Choices

The most common material for a 3D printed prosthetic upper limb is ABS for its low cost and lightweight material.

How to Edit G-code in Cura: Everything You Need to Know

This guide will provide a step-by-step understanding of the tools and processes that are available to you for editing G-code in Cura.

Why 3D Printing Fails?- 5 Examples

3D printing fails for several reasons, including warping, broken build plates, and use of the wrong material.

What Are the Biggest 3D Printed Things?

Many large structures and objects have 3D printing involved.

What are the Smallest 3D Printed Things?

The smallest 3D printed things are artistic sculptures, geometric shapes, and tiny figurines.

Can You Print 3D Shoes?

Many footwear companies have begun 3D printing prototypes or customized designs.

What Is CAD? - A Simple Answer

CAD is computer software that assists with the process of designing, known as computer aided design.

Can 3D Printers Print Metal?

3D metal printing allows for higher complexity and design freedom to create the exact part.

Skynet vs Marlin: Which of These Two Firmwares Is Best?

Marlin is by far the more superior option for newer machines and updated firmware options.

Smoothieware vs Marlin: Which Firmware Is Better?

Marlin is the better firmware choice for 3D printing because its large, experienced community of developers ensures 3 things.

How To Calibrate an M3D Printer: A Quick Guide

Calibrating your M3D printer requires you to check and manually adjust three significant areas.

Inland Vs. Hatchbox: Pros and Cons of Each Filament

Inland and Hatchbox PLA filaments have various pros and cons to consider.

Esun Vs Hatchbox: Which Filament Is Better?

When comparing eSun and Hatchbox PLA filaments, you should consider the following factors.

Ultimaker vs. Lulzbot: Pros & Cons of Each

Ultimaker and Lulzbot are two of the leading manufacturers of 3D printers.

3D Printing Layer Shifting: Here's How to Deal With It

Layer shifting is corrected by a thorough check and maintenance of the machine, particularly the belts, pulleys, print head, and motors.

PrusaSlicer vs. Cura: Which Choice is Better?

PrusaSlicer and Cura are both excellent choices for anyone looking to get the most out of their 3D printer.

What Is the Ideal Print Speed for The Anet A8

The ideal print speed of the Anet A8 is between 30 and 60 mm/s.

CraftWare vs CURA: Which of These Two Softwares Is Best?

Most users agree that CURA is the best option, followed by CraftWare. See why.

Skeinforge vs. Slic3r: Which One Should You Choose?

Choosing between Skeinforge and Slic3r is mostly a matter of personal preference, with both programs strong choices for 3D manufacturing.

Melzi vs Ramps: Which Board is Better?

Ramps boards are more established. Melzi boards are made for mass production.

Is PLA Microwave Safe? Here’s the Truth!

Utensils, microwave components, and containers made from polylactic acid, or PLA, are not microwave safe.

Repetier Host Vs. Cura: Pros & Cons Of Both

Cura is the most popular 3D printing slicer in the world. Repetier Host targets a more professional 3D printing audience.

MatterControl Vs Cura: Differences & Similarities Revealed

While MatterControl and Cura have many similarities, the programs themselves are different.

Cr-10 Vs. Cr-10s: What is the Difference Between These Models?

The Cr-10s features a Z-axis screw, upgraded motherboard, resume printing function, and filament breakage sensor.

PETG vs Acrylic: Which Material Should You Use?

In most cases, you should use PETG over acrylic. PETG is more affordable and 5-7 times stronger than acrylic.

What's the Strongest Infill Pattern? Here is What I Think

Infill patterns can vary depending on what type of job you are doing as well as what kind of materials you are working with.

PETG Vs Nylon: Which Filament Is Better?

PETG and Nylon are great filaments for different uses.

How to Make Your 3D Magnetic Printing Projects: A Complete Guide

Make your 3D prints magnetic by having a high amount of density while simultaneously controlling the magnet’s microstructures.

IdeaMaker vs. Cura: Pros & Cons of Each

Cura includes open-source software while IdeaMaker does not. See what else.

Anycubic Kossel Vs. Prusa I3: Main Differences Revealed

Anycubic Kossel is well-liked for its inexpensive price-point, Prusa i3 is renowned for its recognition from various 3D printer experts and reviewers.

Tevo Tornado Vs. Creality Cr-10: Which Is Better?

The Tevo Tornado and Creality CR-10 are essentially the same machine. Read what comes out of the box.

Marlin vs. Repetier: Which Firmware Should You Choose?

Both Marlin and Repetier have extensive printing features that can be useful in 3D printing.

The Best Anycubic I3 Mega Cura Settings You Must Try Out!

Anycubic I3 Mega Cura printer is one of the most popular printers, understanding its many adjustable settings will aid you in getting the best results.

123D Design vs Sketchup: Which Is Better For You?

123D Design is available to download from third parties, but no longer updated. SketchUp, is more user friendly with a push/pull feature that makes it unique.

The Best Stepper Motor Driver to Use for Your 3D Printer!

The best stepper motor driver depends on the motor you have, the voltage capacity, the motor’s phase, current output rating, and adjustability.

PVA vs HIPS: Which Material Should You Be Using?

PVA is the appropriate support structure for prints with PLA when printing complex geometric prints. Otherwise, HIPS would be a wise choice prints made of ABS.

Simplify3d vs. Cura: Pros & Cons of Both

Satisfactory products, Simplify3d and Cura differ greatly concerning their cost, user interface, functionality, compatibility, features, and additional updates.

How Long Does It Take To 3D Print A Phone Case? This Long!

Printing a 3D phone case only takes a few hours if you use a simple design.

Polypropylene vs. ABS: Pros and Cons of Each

In general, polypropylene has a lower density than ABS, but it also has a lower melting point.

BuildTak Review: The Best Printing Surface?

BuildTak 3D printing surfaces represent themselves as solving some of the most common printing problems, foremost among these being problems with adhesion.

Additive Manufacturing vs. 3D Printing: Same or Different?

Additive manufacturing and 3D printing are different terms used to describe the same process of creating a dimensional object from a computer-animated design.

3D Printing Vs. Injection Molding: Pros & Cons of Each

Injection molding focuses on producing in large volumes, whereas 3D printing focuses on experimental production.

How Long Is A 1kg Spool of Filament? This Long!

A 1 kg spool of 1.75 mm filament is between 100-140 meters long. A 1 kg spool of 3.00 mm filament is 320-410 meters long.

Is Glow in the Dark PLA Abrasive? Here’s the Truth!

Glow in the dark PLA is more abrasive to a printer than standard PLA. This product commonly contains strontium aluminate...

Can You Patent a 3D Printed Product? Here’s the Answer!

3D objects can be patented. The process to patent a 3D object is identical to the patenting process of any other object or idea.

How to Improve Your 3D Printer's Performance: A Quick Guide

3D printers can be improved by incorporating additional tools, optimizing settings, or simply troubleshooting the printer itself.

How Much Can You Print with 1Kg of Filament?

3D printing with filament is a direct transfer system, so expect to print almost 1 Kg to one 1 Kg spool of filament with only minor loss.

Can You Dissolve Polylactic Acid (PLA)? Is it Possible?

PLA is soluble. Polylactic acid can be dissolved using various agents such as methyl ethyl ketone, acetone, ethyl acetate, tetrahydrofuran, and caustic soda.

Is Simplify3D Worth It? My Opinion

For those who are professionals or who need constant access to a quality 3D printing software (or “slicer), Simplify3D is worth the price.

How Accurate Are 3D Printers?

Many variables decide the accuracy of a 3D printer. From the design process to the type of material used. Sometimes inaccuracies can occur.

Is 3D Printing Dead? My Opinion

3D printing is far from dead. On the contrary, it is still growing and evolving in both the private and public sectors and even garners massive federal support.

PETG vs. PLA: Main Pros & Cons of Both

PETG and PLA are common filaments for 3D printing. PLA is sustainable and beginner-friendly, PETG is more stable and impact-resistant.

Mk8 Vs. Mk10: Which Nozzle Should You Be Using?

For smaller designs an MK8 will work perfectly and the MK10 will work for bigger objects.

Buildtak vs. PEI: Which Surface Should You Choose?

PEI is a better option than Buildtak for consistently getting high-quality prints with minimal required time and effort.

PLA vs. PLA+: What are the Main Differences Between Them?

PLA and PLA+ have a lot of similarities, but their differences set the two apart.

1.75mm vs. 3mm Filament: Pros & Cons of Both

1.75 mm filament is popular offering a wide range of extruder nozzle dimension usability. 3 mm is preferred for its durability.

Rapid Prototyping vs 3D Printing: Main Differences Revealed

Rapid prototyping describes the process of producing a 3D object from a computer model using any method. 3D printing is one of those methods, but...

Ender 3 vs. Ender 3 Pro: Main Differences Between Each

The Ender 3 and the Ender 3 Pro are remarkably similar 3D printers, with both models having the same general look, build volume, motherboard.

Is UV Resin Toxic? Here's The Truth!

UV resin used in 3D printing is very toxic, not only for people but also for the surrounding environment. Body parts exposed to the resin can be harmful.

PolyJet Vs FDM: The Main Differences Revealed

One significant difference between the two types is PolyJet produces a finer level of detail where as FDM produces stronger parts.

Is SLA or SLS More Accurate? The Truth Revealed

SLA is a more accurate 3D printing technique than SLS. The resin-based approach of SLA printing leaves the end product with crisp edges and a smooth finish.

A6 Vs. A8 3D Printer: Which One Should You Choose?

Anet3D offers both the A6 and the A8 printer both very well known. If you need a large support community go with A8 if you want to go it alone chose the A6.

How to Tighten 3D Printer Belt: A Step-To-Step Guide

All 3D printers have little quirks that make them unique. Below is a quick reference to the steps you need to follow to tighten your belt.

How to Smooth PLA 3D Prints: A Complete Guide

There are a variety of ways to smooth a PLA 3D print, though most involve removing or adding material. Sanding is the most common method

How Much Filament Should You Buy for Your 3D Printer?

Buy at least two rolls of filament to get started. Then a good rule of thumb is to estimate the weight of the items you intend to print and buy that amount.

The 10 Reasons Why Your 3D Printer is Dislocating

Dislocations are a frustrating issue that can occur during the 3D printing process. Here are 10 reasons why you 3D printer may be dislocating.

Can You Make Money 3D Printing? A Few Tips on How to Do So

With patience and hard work, a little experience in e-commerce, and a trusty 3D printer, you can easily turn your favorite hobby into a money-making venture.

Why Does My 3D Printer Stop Mid Print? A Few Reasons Why

A 3D Printer could stop in the middle of a print for various different reasons. Read to find out what.

3D Printer Belt Tension: Everything That You Need to Know

Tension on a 3D printer belt is essential for getting high-quality prints. Loose tension throws off the accuracy of the print head.

Are PETG Fumes Toxic? What You Need To Know

PETG is the safest 3D printing filament available today. The fumes produced from pure and uncontaminated PETG are harmless.

Elegoo Mars Vs ANYCUBIC Photon: Which Printer Is Better?

Elegoo Mars is the best in terms of affordability paired with quality. However, Anycubic Photon easily out competes Elegoo Mars in its precision and detail.

Makergear M2 Vs Replicator 2: Pros & Cons of Each Model

The top pros of the Makergear M2 and the Replicator 2 are exact opposites. If it’s a “pro” for one, it’s a “con” for the other.

Is PETG Food Safe? What You Must Know About This Material

PETG is food safe. Each manufacturer has to get separate FDA approval, and some brands are even approved by the FDA as a food safe filament.

Purging in 3D Printers: What You Need to Know

To prevent 3D printers from building all of the gunk and residue on the printing machinery, they must be cleaned.

Can I Sell Things from Thingiverse?

You can sell some things from Thingiverse if they have the correct license for it.

Can I Bring a 3D Printer on a Plane?

Yes you can bring a 3D printer on a plane. However, it is best to check with the safety and regulations of your particular airline prior to arriving.

What is the Most Reliable 3D Printer? What You Need to Know

The most reliable 3D printer is the QIDI Tech X-Plus 3D Printer. The reason is...

Are 3D Pens Worth It? My Personal Opinion

3D pen users tend to care less about what they are making and more about the artistic joy it brings to them.

FreeCAD Vs. OpenSCAD: Pros & Cons of Each Software

CAD software typically requires a large upfront cost. Luckily, there are free alternatives like FreeCAD and OpenSCAD, each with it own pros and cons.

How Much Does a 3D Printer Weigh? What You Must Know

The weight of a 3D printing machine depends on its size. A 3D printing machine with a printing area of 150 x 150 x 150 mm weighs around 60.6 lbs (27.5 kg).

The Toybox 3D Printer: Is it Really Easy to Use?

The Toybox 3D printer is so easy to use that you can begin printing in as little as 10 minutes after opening the box.

Can HDPE be used for 3D Printing?

Yes, HDPE (High-Density Polyethylene) can be used as a 3D printing filament? Although the filament may be hard to come by, try making it at home.

3D Printing Raft vs. Brim: What Is the Difference Between Each?

A raft in 3D printing is a series of layers built underneath the model. A brim is a layer along the outside of the model.

3D Printing Microns: What Are They?

A micron is a measurement term used in 3D printing to indicate the height of a printed layer. It is short for micrometer, and is one millionth of a meter.

Delta Vs. Cartesian 3D Printers: Which One Should You Choose?

Cartesian 3D printers are well known, and the significant difference is how the head of the printer moves and navigates.

Does the UPS Store Offer 3D Printing?

Yes, the UPS Store offers 3D printing but only in limited locations, at least today.

Polycarbonate Vs. PETG: Main Pros & Cons of Both Materials

What are the pros and cons between Polycarbonate (PC) and Polyethylene Terephthalate Glycol (PETG)?

The Main Differences Between FFF and FDM Explained

What is the difference between “FFF,” and “FDM,”? Everyone has heard both terms but are they the same or different?

Can You Make Patches With A 3D Printer?

Yes, using a 3D printer, you can now make patches for your own clothes or even make them to sell to others.

3D Printing for Kids: A Parents Guide

The future of homework isn’t to print a school paper, rather, it will be to print a 3D object. A parents guide to 3D printing.

What is 3D Printing Material?

3D printing material is plastic, nylon, glass, resin, metal, wax, chocolate, wood and more. It is the material the printer extrudes to create an object.

The 3D Printing Materials Guide

The range of materials available for 3D printing is incredibly diverse, with new innovative materials entering the market each year.

Complete List of 3D Printer Types

Whether you are a hobbyist or a professional looking for a 3D printer, you will want to learn more about 3D printer and types before making a big purchase.

What is the Most Common Material for 3D Printing?

Each material has its pros and cons, depending on your intended use, budget, and preferences.

Complete List of 3D Printer Parts

Understanding the technology you use is both interesting and useful. You may even want to build your own 3D printer as your next DIY project!

Is 3D Printing a Good Investment? Who are the Players?

The answer is, it depends on what the investment does after you buy it. No one can predict a good investment but there are indicators that can help.

How to Store 3D Printer Filament

The optimal way to store 3D printer filament is in an air-free environment.

10 Common Questions About 3D Printing Materials

Next to the printer, material is the most important aspect of 3D printing. The quality of the material put in, is the quality of the object that will come out.

Would You Eat a 3D Printed Steak?

A bizarre question no doubt, but stick with me and read it through so you can fully understand and appreciate the question “Would you eat a 3D printed steak?”.

What Skills Do I Need for 3D Printing?

The skills that are necessary for 3D printing are effortless. The fact is you most likely possess them already; they may just need some fine-tuning!

What is the History of 3D Printing?

Many people think of 3D printing as a cutting-edge technology. The truth is 3D printing dates back to the 1980's.

How much do companies charge for 3D printing?

In order to estimate 3D printing service fees, you must understand how the companies actually price their product as the pricing involves several factors.

The 9 Best 3D Printers Under $1000

What should you look for in a good 3D printer? You should look for a printer that will best accommodate you in your daily life.

What is the Best 3D Modeling Software?

There are many 3D modeling software to choose from, let us help remove the difficulty of choosing.

Is 3D Printing Hard to Learn?

As a machine, 3D printers print objects seemingly out of thin air, such a marvel of engineering can’t possibly be as simple as plug-in and go. Or can it?

The 3D Printing Spot Dictionary

Check out this 3D printing language dictionary to help you navigate the 3D world.

Do 3D Pens Really Work?

3D pens are an exciting technology, but do 3D pens really work?

2020 Trends in 3D Printing

The global 3D printing market is experiencing incredible growth. Read about key trends which will drive the 3D printing market in 2020.

20 Useful Things You Can 3D Print for Your Home

We've put together this list of 20 useful things you can 3D print for your home. Some of them are obvious, some less so.